Results 1 to 4 of 4

Thread: Map doesn't show up in the Campaign browser.

  1. #1

    Question Map doesn't show up in the Campaign browser.

    Hello Forum.

    I'm pretty new to mapping and have a problem now and i hope you can help me with it.
    I did a proper map with the right amount of spawnzones and running the map isn't a problem too. So i actually wanted to try out the map with some friends of mine and set it into VPK. I think that this VPK is more confusing than the theory of relativity but nevermind that.
    I set up the VPK over the tutorial. ( can i post a link to another side or rather not? )
    Then i pressed the VPK and it said "succesfully installed". I start Alien swarm and check it out, the campaign is shown but sadly it doesn't seem to have a map linked to it. Its just empty. And when i try to start the campaign anyway, it's stuck on the "Create Game" side.

    Does anyone know how to handle this problem?



    "Campaign Name" Folder
    - maps
    - - contains my map .bsp
    - material
    - - vgui
    - - - doesn't contain anything since i don't have a custom texture pack inside the map
    - resource
    - - campaigns
    - - - contains the .txt file with informations about the map and campaign, linking to eachother. (there is maybe the problem)
    - - overview
    - - - contains the .txt file about the map and stuff, but i didn't change anything from the default one because i didn't do a map or a campaign icon at all


    I don't have any other files in there

    Thanking you in anticipation.
    Last edited by smoochie_da_beaver; 27th Jan 2011 at 05:50 AM.

  2. #2
    Member Schleicher's Avatar
    Registered
    Jun 2003
    Location
    not in the Playboy Manor =(
    Posts
    3,174
    http://developer.valvesoftware.com/w...dd-on_Tutorial

    I cant remember at all but this should have the answer if you didnt use it already. Go over the addoninfo.txt with a fine tooth comb to ensure its absolutely correct tho, i do remember that being a finicky bitch. Also make sure the file structure is absolutely correct too.

  3. #3
    Thanks but i already tried this tutorial too.

    And actually this (which is much better) http://swarmarmory.com/forums/viewtopic.php?f=9&t=284


    I will just show you the txt i got, maybe you know what i got wrong (hopefully):
    addoninfo.txt

    // The addoninfo.txt file is a metadata file that is required by all Source Engine Add-ons.

    "AddonInfo"
    {
    addonSteamAppID 630 // 630 is the app ID for Alien Swarm
    addontitle "The_Queen_Is_History" // Add-on title that shows up in Add-ons list. ~20 chars max
    addonversion 1.0 // Version number of add-on version of the form <major>.<minor>
    addontagline "The Queen has returned, travel through time and kill her." // Add-on tagline or wrap-up- a short description. ~100 chars max
    addonauthor "Cronos" // Name/alias of the author
    addonSteamGroupName "" // (Optional) Steam group related to the add-on. We use this to construct a URL to the group page.
    addonauthorSteamID "" // (Optional) Steam ID of author. We use this to construct a URL to the author's page.
    addonContent_Campaign 1 //This addon provides muliple connected maps with a finale
    addonURL0 "test.com" //An html home page for the add-on that includes a download link.

    // short description that appears in the Add-on list screen...
    addonDescription "The Queen has returned, travel through time and kill her."
    }

    -------------------------------------------------------------------------------

    the txt inside the campaigns folder

    GAME
    {
    // identifier for this campaign
    "CampaignName" "The_Queen_Is_History"

    // description shown on the main menu when choosing which campaign to play
    "CampaignDescription" "The Queen is free again, chase her through history and kill her."

    // texture used on the main menu when choosing which campaign to play
    "ChooseCampaignTexture" "swarm/campaign/jacob_galacticmap"

    // texture used on the campaign screen for the map
    "CampaignTextureName" "swarm/campaign/jacob_galacticmap"

    // these textures are overlaid on top of the campaign map in order
    "CampaignTextureLayer1" "swarm/Campaign/CampaignMap_EmptyLayer" //"CampaignTextureLayer1" "swarm/Campaign/JacobCampaignMap_Haze"
    "CampaignTextureLayer2" "swarm/Campaign/CampaignMap_EmptyLayer" //"CampaignTextureLayer2" "swarm/Campaign/JacobCampaignMap_SnowNear"
    "CampaignTextureLayer3" "swarm/Campaign/CampaignMap_EmptyLayer" //"CampaignTextureLayer3" "swarm/Campaign/JacobCampaignMap_SnowFar"

    // custom campaign credits file
    //"CustomCreditsFile" "resource/CustomCampaignCredits"

    // position of this campaign in the galactic map (coords go from 0 to 1023)
    "GalaxyX" "660"
    "GalaxyY" "262"

    // searchlights (optional, max of 4)
    // angle: 0 is right, 90 is up, 180 is left, 270 is down
    //"Searchlight1X" "217"
    //"Searchlight1Y" "860"
    //"Searchlight1Angle" "80"
    //"Searchlight2X" "263"
    //"Searchlight2Y" "751"
    //"Searchlight2Angle" "100"
    //"Searchlight3X" "92"
    //"Searchlight3Y" "446"
    //"Searchlight3Angle" "90"
    //"Searchlight4X" "580"
    //"Searchlight4Y" "266"
    //"Searchlight4Angle" "90"

    // first mission entry is a dummy for the starting point
    "MISSION"
    {
    "MissionName" "Entry Port"
    "MapName" "start_area"
    "LocationX" "330"
    "LocationY" "780"
    "DifficultyModifier" "-2"
    "Links" "time_machine"
    "LocationDescription" "Home Base"
    "ShortBriefing" "Dropship Bloodhound will enter atmosphere at these co-ordinates and proceed to primary objective."
    }

    // each mission listed
    "MISSION"
    {
    "MissionName" "Time Machine" // name used on the map screen, etc.
    "MapName" "time_machine" // name of the map file
    "LocationX" "525" // location of the dot on the map
    "LocationY" "700" // (from 0 to 1023, on the above texture)
    "ThreatString" "1" // Threat level string to help players decide where to go next
    "Links" "start_area" // map names of neighbours (if single map just put the first map name in again.
    "LocationDescription" "Secret Lab"
    "ShortBriefing" "Get inside the lab and find a way to the time machine."
    "AlwaysVisible" "1"
    "NeedsMoreThanOneMarine" "0" // If set to 1, two players need to be connected to play (no solo play)
    }
    }

    --------------------------------------------------------

    The txt inside the overview folder

    GAME
    {
    // radar map position and scale (see the Valve Wiki for more information: http://developer.valvesoftware.com/wiki/Main_Page)
    "pos_x" "0"
    "pos_y" "0"
    "scale" "20.0"

    // material used for the radar map (in the bottom left corner)
    "material" "vgui/swarm/Computer/ComputerScan" // example: "vgui/swarm/Overviews/landingbay02Overview"

    // material used for the briefing map (shown before the mission starts)
    "briefingmaterial" "vgui/swarm/MissionPics/UnknownMissionPic" // example: "vgui/swarm/Overviews/landingbay02briefingOverview"

    // Title of the mission
    "missiontitle" "Time machine"
    // Description text shown for the mission
    "description" "Enter the secret area and find the time machine"

    // Mission image that shows when selecting this mission
    "image" "swarm/MissionPics/UnknownMissionPic" //must be under "vgui" - dont include vgui in the path

    "version" "1.0"
    "author" "Cronos"
    "website" "http://www.alienswarm.com/"
    }

  4. #4
    Member Schleicher's Avatar
    Registered
    Jun 2003
    Location
    not in the Playboy Manor =(
    Posts
    3,174
    1) Is the main structure of the vpk : maps folder, resource folder, material folder, addoninfo.txt?

    2) Could it be resources/overviews?

    Only other suggestions id have would be taking all that stuff out of the tutorial map folder and filling it with your own info, thats how i did it XD

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. My Browser is Bigger Than Your Browser.
    By necros in forum Community Chat
    Replies: 21
    Last Post: 10th Sep 2006, 06:01 PM
  2. Voting Telic Campaign doesn't work properly
    By Stolid in forum Alien Swarm 2K4 Tech Help
    Replies: 11
    Last Post: 6th Aug 2006, 05:07 PM
  3. Alien Swarm : Campaign mode on Listen Server not Working. Show-stopper.
    By Wilhuf in forum Troubleshooting & Technical Help
    Replies: 3
    Last Post: 31st May 2004, 02:46 PM
  4. Why Thieving Just Doesn't Pay Yet
    By Biohazard in forum Community Chat
    Replies: 130
    Last Post: 29th Mar 2003, 07:20 PM
  5. Thievery doesn't run :(
    By horde666 in forum Troubleshooting & Technical Help
    Replies: 6
    Last Post: 7th Mar 2003, 09:59 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •