Announcement

Collapse
No announcement yet.

OpenGL & Direct3D Tweaks...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Omega
    replied
    I used the one I mentioned on my forums.</pimpage>

    Leave a comment:


  • LaughingRat
    replied
    Originally posted by ZTx3
    Try this OpenGL renderer here. In fact I suggest you all try it. It's faster and more stable than the one that UT has by default and doesn't need any moding to anything to work

    For me personally it's faster than Direct3D
    I've heard a couple people swear by that renderer, so I tried it. I was lucky to pull 15 fps using it, on a system that usually averages 60. Still, it's worth trying, as long as you back up the driver file you currently have, in case you have the problems with it that I did.

    Leave a comment:


  • ZTx3
    replied
    Try this OpenGL renderer here. In fact I suggest you all try it. It's faster and more stable than the one that UT has by default and doesn't need any moding to anything to work

    For me personally it's faster than Direct3D

    Leave a comment:


  • DaNtAn
    replied
    well thanx I'll try this out but when I use the 320x240 it's runs slow but real SLOW! :?

    Leave a comment:


  • Curunir
    replied
    Originally posted by CrouchingDork
    Just get a way better CPU and you're set.

    Maybe some ram too.

    Nice computers don't always work right if you don't have them configured correctly.


    Originally posted by The_Dan
    For a low end PC:

    Run it in 320 X 240, that should go pretty smoothly

    (Seriously though, you'd be better off searching on Google for "Unreal engine" & "performance", since everyone around here is just gonna tell you to set it up like their individual UT installation is set up)
    Speaking of Google. M$ is going to start thier own google.

    Source

    Leave a comment:


  • The_Dan
    replied
    For a low end PC:

    Run it in 320 X 240, that should go pretty smoothly

    (Seriously though, you'd be better off searching on Google for "Unreal engine" & "performance", since everyone around here is just gonna tell you to set it up like their individual UT installation is set up)

    Leave a comment:


  • CrouchingDork
    replied
    Just get a way better CPU and you're set.

    Maybe some ram too.

    Leave a comment:


  • DaNtAn
    started a topic OpenGL & Direct3D Tweaks...

    OpenGL & Direct3D Tweaks...

    Can any one out there post some tweaks for Thievery (For file THauX.ini) on OpenGL and Direct3D. For Low end Pc's and High Edge PC's like:

    Part Low End High Edge
    ================================================
    Cpu : Pentium 3 450 (and up) Pentium 4 1.4 (Up)
    or or
    Duron 550 (and up) ATHLON XP/MP 1.4 (Up)

    Video Card : GeForce 2 [MX/GTS(Pro)/Ti] GeForce 3 (Up)
    or or
    Radeon 7xxx/8xxx Radeon 9000 (Up)

    Memory : 64-128 MB SDRAM 256-512 DDR-SDRAM

    So please if you got somthung to make thing better/faster post it.
Working...
X