Announcement

Collapse
No announcement yet.

How do you start a vote and/or vote?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • How do you start a vote and/or vote?

    I am not an Unreal Tournament guru, and even though voting is enabled on my server, I have no idea how to initiate a vote or to place a vote. Could someone help me out?

    Also, what are the funciton keys for (other than "F1" and "F2")? I always seem to some how crash my game when I start pressing buttons... :roll:
    Team ORJ

  • #2
    I posted a thread in our forums at Crackaz a while back on kick voting and kickban voting. That's hardly ALL the votecalls but this should get you started.

    As for the function keys, NEVER press F4. It crashes almost every system. F5 and F6 are 1st and 3rd person view (might have that reversed, not sure. Don't use them myself, I have a flase toggle alias set to F4...), F7 is netstats, F9 takes a screenshot.

    Comment


    • #3
      Also F11 either increases or decreases gamma settings (I forget which). F12 runs the game in windowed mode.

      Comment


      • #4
        Also two other vote commands not listed on that crackaz forum are

        callvote changemap TH-mapname

        callvote nextmap TH-mapname

        Comment


        • #5
          Thank you for the info.

          I will try and remember all that so next time I'm playing I know what to do.
          Team ORJ

          Comment


          • #6
            F4? Ooh, gotta try that. I'm sure I've pressed it before with no ill results. What is it supposed to do? (There was a thread on TTLG about F keys but I'm too lazy to find it.)

            F6 gives me net stats and F5 do nothing for me. I would very much like to switch to 1st person view when spectating some players, but my keys do not work. Did I do something to disable this? Hmm. I know about "behindview 1" and "..0" and have used it on myself ingame. Does this work while spectating?

            Also, is there a key that will let me switch to other teammates ingame? I thought I did this many moons ago, but I can't now.
            "Garlisk's got a lov-el-y bunch of coconuts."

            Comment


            • #7
              Originally posted by Buho
              F4? Ooh, gotta try that. I'm sure I've pressed it before with no ill results. What is it supposed to do? (There was a thread on TTLG about F keys but I'm too lazy to find it.)
              F4 is supposed to show the gamelog or something, but it just crashes most systems. I've rebound it to toggle 1st/3rd person view.

              Originally posted by Buho
              F6 gives me net stats and F5 do nothing for me. I would very much like to switch to 1st person view when spectating some players, but my keys do not work. Did I do something to disable this? Hmm. I know about "behindview 1" and "..0" and have used it on myself ingame. Does this work while spectating?
              Sounds like you've messed with the default keybindings. Normally F5 and F6 are 1st and 3rd person view, and F7 gives you netstats. The console commands "behindview 0" and "behindview 1" do work ingame, though, both while playing and while spectating.

              Originally posted by Buho
              Also, is there a key that will let me switch to other teammates ingame? I thought I did this many moons ago, but I can't now.
              I think this was disabled.

              Comment


              • #8
                Originally posted by LaughingRat
                Originally posted by Buho
                Also, is there a key that will let me switch to other teammates ingame? I thought I did this many moons ago, but I can't now.
                I think this was disabled.
                Yes, the "view teammates" was disabled in 1.2 by the dev's.

                Comment


                • #9
                  Originally posted by mOdEtWo
                  Yes, the "view teammates" was disabled in 1.2 by the dev's.
                  There you go, straight from the groupie's mouth. :twisted:

                  Comment


                  • #10
                    They trust a man, more than they trust a rat. I'm just sticking with your answear, making it more reliable to others.

                    Comment


                    • #11
                      My bor binded f9 to ask for help how can i reset it to take screenies again?
                      This is my cool sig.

                      Comment


                      • #12
                        The command to take a screenshot is "sshot".

                        Either use "preferences" or edit your ini file to that:
                        F9=sshot

                        Comment


                        • #13
                          Originally posted by Yenzarill
                          The command to take a screenshot is "sshot".

                          Either use "preferences" or edit your ini file to that:
                          F9=sshot
                          You can't do it in preferences. Either edit your ThieveryUser.ini file so that it has "F9=sshot", or while ingame, open the console and type "set input F9=sshot".

                          Comment


                          • #14
                            In TheiveryUser.ini, find the line that says "F4=<whatever>" and change it to "F4=". I found it's not very helpful to have a key that crashes the program..

                            Comment


                            • #15
                              Originally posted by Slappy
                              In TheiveryUser.ini, find the line that says "F4=<whatever>" and change it to "F4=". I found it's not very helpful to have a key that crashes the program..
                              You kidding? It's GREAT! Hit it just as a guard is about to kill you, and you can deny him the kill! Then you can blame it on your system crashing, and it's not even a lie!!

                              Comment

                              Working...
                              X